Dedicated to Research Since 1993
  •  

    info@genesismarketinsights.com

Global Spray Drying Equipment Market By Type (Cooking, Refrigeration, Laundry), By Application (Food, Pharmaceuticals, And Chemical), By Drying Stage (Multistage, Two stage), By Flow Type (Co-current flow, Counter current flow), By Cycle Type (Open Cycle, Closed Cycle) -Global Size Analysis and Industry Forecast, 2018-2023.

 Consumer Goods

Report Overview

Global Spray Drying Equipment Market was valued at USD 4.43 Billion in the year 2017. Global Spray Drying Equipment Market is further estimated to grow at a CAGR of 6.12% from 2018 to reach USD 6.33 Billion by the year 2023. The North America region holds the highest market share in 2017 and the Asia Pacific is considered as the fastest growing market in the forecasted period. At a country level, US, China and U.S. are projected to grow strongly in the coming years due to increasing density of population and funding through Research and Development.

GEA (Germany), SPX Flow (U.S),Dedert Corporation (U.S) are the key players in this market. Rising research and development expenses are catering to changing demand of end users. Similarly, growth strategies such as acquisition, merger and expansion of the distribution network were few techniques adopted by most of Tier 1 and Tier 2 manufacturers in recent years.

 

Drivers:         

            Increase in ready to eat food products

Restraints:

            Expensive and costly

Opportunities:

            New product innovation with technological advancements 

Challenges:                

            Increasing competition due to alternative treatments           

The Global Spray Drying Equipment Market is segmented as By Type, Application, Drying Stage, Flow Type, Cycle Type and Region. The Type segment is divided into Cooking, Refrigeration, Laundry, Home comfort and others in which cooking accounts for the largest market share. Based on Application, the spray drying equipment market is segmented into food, pharmaceuticals, chemical, and others. The food segment is estimated to lead the market during the review period. The growing usage of spray drying equipment for food encapsulation is expected to drive the growth of this segment.

Based on Cycle Type, the market is segmented into open cycle and closed cycle. The closed cycle segment is projected to grow at a significantly higher rate during the forecast period. The closed cycle spray dryer process involves the recycling of the drying gas, which is used to heat in the drying chamber. This type of spray drying process is preferred when there are environmental issues; the efficiency is also higher in the closed cycle spray drying process. Among all, the closed cycle segment is projected to grow at a moderate CAGR of XXX% during the forecast period.

Based on Flow Type, the spray drying equipment market is segmented into co-current flow, counter current flow, and mixed flow. The mixed flow segment is projected to grow at a significantly higher rate during the forecast period. Mixed flow spray dryers are a combination of both, co-current and counter-current flow spray dryers. This type of arrangement usually requires higher temperature and is used for drying coarse free-flowing powders. Based on Drying Stage, the spray drying equipment market is segmented into multistage, two stage, and single stage. The multistage segment is projected to grow at the highest rate during the forecast period. The growth of this segment is driven by the increasing demand for multistage spray dryer for R&D purposes.

Key Benefits for Stakeholders

Spray drying equipment manufacturers

Spray drying equipment suppliers

End users

By Type

Cooking

Refrigeration

Laundry

Home comfort

Others

By Application

Food

Pharmaceuticals

Chemical

Others

By Drying Stage

Multistage

Two stage

Single stage

By Flow Type

Co-current flow

Countercurrent flow

Mixed flow

By Cycle Type

Open Cycle

Closed Cycle

By Region

North America

Europe

Asia-Pacific

RoW

Key Market Players

GEA

SPX FLOW

Dedert Corporation

Buchi Labortechnik

European Spray dry Technologies LLP

Changzhou Lemar Drying Engineering Co. Ltd.

Shandong Tianli Drying Technology and Equipment

Acmefil

New AVM Systech

C.E Rogers

(A brief overview of 10 companies is also provided)

Research Methodology:

Genesis Market Insights follows in-depth Research Methodology focused on reducing deviation in the collected data. GMI offers the most precise evaluations and projection for the market numbers. GMI engages following Market Engineering techniques –

  1.      Raw Market Data is collected and compared with the Existing in-house Data on a broad front.
  2.      Both Bottom-Up and Top-Down approaches are analyzed for segmenting and estimating measurable aspects of the market.
  3.      To avoid bias, we filter the collected data collected from authenticated sources.
  4.      GMI has a well proven Statistical Modeling System for estimates and forecasts.
  5.      Further, the report findings are validated with the Industry Expert Panel on face to face or telephonic interviews.
  6.      Panelists are approached from Leading Enterprises across the value chain including manufacturers, suppliers, technology providers, domain experts and buyers so as to validate a thorough and balanced market overview.

Detailed customization is also available for you. Further, if the report listed above does not meet your key requirements. Our customized research report will analytically cover the required market information you need which will help you to plan your business decisions.

Table Of Content

1. Introduction

1.1 Market Vision

       1.1.1 Market Definition

       1.1.2 Market Scope

1.2 Limitations

1.3 Stakeholders

2. Research Methodology

2.1. Research Process

       2.1.1. Secondary Research

             2.1.1.1. Key Data from Secondary Research

       2.1.2. Primary Research

             2.1.2.1. Key Data from Primary Research

             2.1.2.2. Breakdowns of Primary Interviews

2.2. Market Size Estimation

       2.2.1. Bottom-Up Approach

       2.2.2. Top-Down Approach

       2.2.3. Annual Revenue Process

2.3. Data Triangulation 

2.4. Research Assumptions 

       2.4.1. Assumption

3. Executive Summary

4. Market Overview

4.1. Introduction

4.2. Drivers

4.3. Restraints

4.4. Opportunities

4.5. Challenges

4.6. Regulations

4.11. Supply Chain/Value Chain Analysis

4.13. Patent & Standards

5. Industry Trends

5.1. Introduction

5.2. Porter’s Five Forces Analysis

       5.2.1. Threat of New Entrants

       5.2.2. Threat of Substitutes

       5.2.3. Bargaining Power of Buyers

       5.2.4. Bargaining Power of Suppliers

       5.2.5. Intensity of Competitive Rivalry

6. Global Spray Drying Equipment Market, By Type

6.1 Cooking

6.2 Refrigeration

6.3 Laundry

6.4 Home comfort

6.5 Others

7. Global Spray Drying Equipment Market, By Application

7.1 Food

7.2 Pharmaceuticals

7.3 Chemical

7.4 Others

8. Global Spray Drying Equipment Market, By Drying Stage

8.1 Multistage

8.2 Two stage

8.3 Single stage

9. Global Spray Drying Equipment Market, By Flow Type

9.1 Co-current flow

9.2 Counter current flow

9.3 Mixed flow

10. Global Spray Drying Equipment Market, By Cycle Type

10.1 Open cycle

10.2 Closed cycle

11. Geographical Analysis

11.1. Introduction

11.2. North America

       13.2.1. U.S.

       13.2.2. Canada

       13.2.3. Mexico

11.3. Europe

       11.3.1. U.K.

       11.3.2. Germany

       11.3.3. Italy

       11.3.4. France

       11.3.5. RoE

11.4. Asia Pacific

       11.4.1. South Korea

       11.4.2. China

       11.4.3. Japan

       11.4.4. India

       11.4.5. RoAPAC

11.5. RoW

       11.5.1. Latin America

       11.5.2. Middle East and Africa

12. Company Profiles

(Business Overview, Financial Overview, Product write up, Recent Developments)

12.1 GEA

12.2 SPX FLOW

12.3 Dedert Corporation

12.4 Buchi Labortechnik

12.5 European Spraydry Technologies LLP

12.6 Changzhou Lemar Drying Engineering Co. Ltd.

12.7 Shandong Tianli Drying Technology and Equipment

12.8 Acmefil

12.9 New AVM Systech

12.10 C.E Rogers

(A brief overview of 10 companies is also provided)

13. Competitive Analysis

13.1. Introduction

13.2. Market Positioning of Key Players

13.3 Competitive Strategies Adopted by Leading Players

        13.3.1. Investments & Expansions

        13.3.2. New Product Launches

        13.3.3. Mergers & Acquisitions

        13.3.4. Agreements, Joint Ventures, and Partnerships

14. Appendix

14.1. Questionnaire

14.2. Available Customizations 

14.3. Upcoming Events (Trade Fair, Exhibitions, Conferences)

Summary

No Content Available.

PURCHASE OPTIONS

ASK FOR SPECIAL PRICING

Related Reports