Dedicated to Research Since 1993
  •  

    info@genesismarketinsights.com

Global Molding & Bulk Molding Compounds Market by Resin Type (Epoxy, Polyester) by Fiber type (Glass Fiber, Carbon Fiber) by End-Users Industry (Aerospace, Electronic & Electrical, Automotive & Transportation, Building & construction, Domestic appliances) – Business Overview, Analysis and Industry Forecast 2017-2023

 Chemical and Material

Report Overview

Global Molding & Bulk Molding Compounds Market was valued at USD XX billion in the year 2017. Global Molding & Bulk Molding Compounds market is further estimated to grow at a CAGR of XX % from 2018 to reach USD XX billion by the year 2023.

In the Global Molding & Bulk Molding Compounds Market, by region Asia Pacific region holds the highest market share in 2017 and is also market is considered as the fastest growing market in the forecasted period owing to their market demands. At the country level, China, and Japan in Asia-Pacific is projected to grow strongly in the coming years. China is expected to witness strong growth in the demand for sheet molding & bulk molding compounds, owing to the favorable government support to electrical & electronics industry to increase production.

Drivers:

            Rising Demand for Light-weight Vehicles

Restraints:

            Changing government regulations and norms.

Opportunities:

            Changing demand and business environment in the automotive industry

Challenges:

            High Cost and restriction on the use of raw material

The segmentation is done on the basis of resin type, by fiber type, by end users industry, and by region. On the basis of resin types, the epoxy segment is expected to hold the highest market share during the forecast period.

The segmentation is done on the basis of fiber type, the market is segmented as Glass Fiber and Carbon Fiber of which Carbon Fiber segment is expected to hold the highest market share during the forecast period. By End- Users Industry, the Electronic & Electrical segment is projected to be the fastest-growing segment of the Molding & Bulk Molding Compounds market and is expected to grow with the highest CAGR of XX% in the forecasted period.

Polytec (U.S), Polynt (Italy), IDI Composites International (Indiana), Menzolit (Italy), Continental Structural Plastics (U.S), Plastic Omnium (France), Core Molding Technologies (U.S), Koninklijke Ten Cate BV. (Netherland), Citadel Plastics Holding Inc. (U.S), and Showa Denko K.K. (Japan) are some of the key players in the Global Molding & Bulk Molding Compounds market.

Key Benefits for Stakeholders

Molding & Bulk Molding Compounds Manufacturers, Distributors and Retailers

Raw material suppliers

Research and Consulting Organization

End-use industries

Investment research firms

By Resin Type

Epoxy

Polyester

By Fiber type

Glass Fiber

Carbon Fiber

By End- Users Industry

Aerospace

Electronic & Electrical

Automotive & Transportation

Building & construction

Domestic appliances

Others (including Sanitary and Medical)

By Region

North America

Europe

Asia-Pacific

RoW

Key Market Players

Polytec

Polynt

IDI Composites International

Menzolit

Continental Structural Plastics

Plastic Omnium

Core Molding Technologies

Koninklijke Ten Cate BV.

Citadel Plastics Holding Inc.

Showa Denko K.K.

 (A brief overview of 10 companies is also provided)

Research Methodology:

Genesis Market Insights follows in-depth Research Methodology focused on reducing deviation in the collected data. GMI offers the most precise evaluations and projection for the market numbers. GMI engages following Market Engineering techniques –

  1.      Raw Market Data is collected and compared with the Existing in-house Data on a broad front.
  2.      Both Bottom-Up and Top-Down approaches are analyzed for segmenting and estimating measurable aspects of the market.
  3.      To avoid bias, we filter the collected data collected from authenticated sources.
  4.      GMI has a well proven Statistical Modeling System for estimates and forecasts.
  5.      Further, the report findings are validated with the Industry Expert Panel on face to face or telephonic interviews.
  6.      Panelists are approached from Leading Enterprises across the value chain including manufacturers, suppliers, technology providers, domain experts and buyers so as to validate a thorough and balanced market overview.

Detailed customization is also available for you. Further, if the report listed above does not meet your key requirements. Our customized research report will analytically cover the required market information you need which will help you to plan your business decisions.

Table Of Content

1. Introduction

1.1 Market Vision

       1.1.1 Market Definition

       1.1.2 Market Scope

1.2 Limitations

1.3 Stakeholders

2. Research Methodology

2.1. Research Process

       2.1.1. Secondary Research

             2.1.1.1. Key Data from Secondary Research

       2.1.2. Primary Research

             2.1.2.1. Key Data from Primary Research

             2.1.2.2. Breakdowns of Primary Interviews

2.2. Market Size Estimation

       2.2.1. Bottom-Up Approach

       2.2.2. Top-Down Approach

       2.2.3. Annual Revenue Process

2.3. Data Triangulation 

2.4. Research Assumptions 

       2.4.1. Assumption

3. Executive Summary

4. Market Overview

4.1. Introduction

4.2. Drivers

4.3. Restraints

4.4. Opportunities

4.5. Challenges

4.6. Regulations

4.7. Supply Chain/Value Chain Analysis

4.8. Patent & Standards

5. Industry Trends

5.1. Introduction

5.2. Porter’s Five Forces Analysis

       5.2.1. Threat of New Entrants

       5.2.2. Threat of Substitutes

       5.2.3. Bargaining Power of Buyers

       5.2.4. Bargaining Power of Suppliers

       5.2.5. Intensity of Competitive Rivalry

6. Molding & Bulk Molding Compounds Market, By Resin Type

6.1 Epoxy

6.2 Polyester

7. Molding & Bulk Molding Compounds Market, By Fiber type

7.1 Glass Fiber

7.2 Carbon Fiber

8. Molding & Bulk Molding Compounds Market, End- Users Industry

8.1 Aerospace

8.2 Electronic & Electrical

8.3 Automotive & Transportation

8.4 Building & construction

8.5 Domestic appliances

8.6 Others (including Sanitary and Medical)

9. Geographical Analysis

9.1. Introduction

9.2. North America

       9.2.1. U.S.

       9.2.2. Canada

       9.2.3. Mexico

9.3. Europe

       9.3.1. U.K.

       9.3.2. Germany

       9.3.3. France

       9.3.4. RoE

9.4. Asia Pacific

       9.4.1. South Korea

       9.4.2. China

       9.4.3. Japan

       9.4.4. RoAPAC

9.5. RoW

       9.5.1. Latin America

       9.5.2. Middle East and Africa

10. Company Profiles

(Business Overview, Financial Overview, Product write Up, Recent Developments)

10.1 Polytec

10.2 Polynt

10.3 IDI Composites International

10.4 Menzolit

10.5 Continental Structural Plastics

10.6 Plastic Omnium

10.7 Core Molding Technologies

10.8 Koninklijke Ten Cate BV.

10.9 Citadel Plastics Holding Inc.

10.10 Showa Denko K.K.

(A brief overview of 10 companies is also provided.)

11. Competitive Analysis

11.1. Introduction

11.2. Market Positioning of Key Players

11.3 Competitive Strategies Adopted by Leading Players

        11.3.1. Investments & Expansions

        11.3.2. New Product Launches

        11.3.3. Mergers & Acquisitions

        11.3.4. Agreements, Joint Ventures, and Partnerships

12. Appendix

12.1. Questionnaire

12.2. Available Customizations 

12.3. Upcoming Events (Trade Fair, Exhibitions, Conferences) 

* The list of tables and figures will be provided in the sample report.

Summary

No Content Available.

PURCHASE OPTIONS

ASK FOR SPECIAL PRICING

Related Reports